How are Solar Panels Installed?
Understanding how solar panels mount to your roof is an important part of your solar energy system. Solar panels are connected to your roof through a racking system. Racking systems vary depending on the type of roof you have on your home or business.
There are five basic types of rooftop solar racking systems based on the type and style of your roof:
- Asphalt Shingle Roofs with Mechanically attached racking
- Flat Roofs with Ballast-mounted racking
- Standing seam metal roofs with non-penetrative attachment racked
- Profile metal roofs with penetrative attached racking
- Integrated solar shingles
Solar rooftop racking systems are often rated to withstand winds in excess of 120MPH, and in many cases can actually protect your existing roof. No matter the type of rooftop mounting system, solar racking manufacturers typically carry product warranties that match the full 25-year warranty on a quality solar panel and are likely to outlast the warranty on an existing roof. Additionally, a qualified solar installer will also typically offer a workmanship warranty of at least 1-year to protect homeowners.
Millions of homes in the United States have had solar energy systems installed on pitched Asphalt shingle roofs using a lag-bolt and flashing system. This racking system allows your solar panels racking to be bolted to the rafters of the home’s roof. To ensure no possibility of leaks, the bolt-penetrations in your roof should be sealed and weatherized by your solar installation professional by both chemical (caulking) and mechanical (flashing) means. Your solar panels are then attached and bonded to the racking system per the manufacturer’s instructions.
Flat rooftops using a rolled thermo-plastic or rolled asphalt adhesive covering are becoming more popular with modern buildings. Solar panels installed on flat roofs often need no mechanical attachment to the roof itself. Instead, solar panels are set and secured into manufactured trays that are weighted down to the roof using ballast-blocks made of stone or concrete. This technique introduces no holes in the roof and can make future system maintenance easier for your solar technicians.
Standing seam metal roofs are ideal for solar energy system installations. Like an asphalt shingle roof the solar racking system is mechanically attached to the metal roof, but unlike a shingled roof the system will clamp onto the metal seams of the roof material and not need to penetrate or introduce holes into your roof.
Profile metal roofs are long-lasting but for a solar energy system to be attached to this roof type the solar racking system must screw into the metal of the roof itself in order to be mechanically attached. In some cases, the racking system does not need to penetrate the roof decking or roof structure in order to be firmly and adequately attached.
Integrated solar shingles may be the wave of the future for rooftop and residential solar energy systems. These shingle-type solar panels not only generate electricity but also act as your roof’s primary barrier to the elements. Currently, solar shingles are very expensive and have limited availability.
How Are Solar Panels Installed on a Tile Roof?
Same answer as above. It can be done but there are challenges and it will likely be more expensive than installing solar on a traditional asphalt shingle or metal roof. Additionally, due to the delicate nature of tile roofs, it may be hard to find an installer with the requisite skill and equipment. Homeowners with tile roofs may want to consider alternatives such as a ground mount, car canopy, or pergola application.
Can You Put Solar Panels on a Shake Roof?
The short answer is yes, you can put solar panels on a shake roof, however, it does present some challenges. Shake roofs are more delicate than asphalt shingle or metal roofs and sometimes made of wood such as cedar. Installing solar on a shake roof requires a lot of attention to detail and extra labor so as to not damage the tiles underneath and around the solar array. It may be hard to find a company willing to install solar on a shake roof and will likely be more expensive. Homeowners with shake roofs may want to consider alternatives such as a ground mount or pergola application.
Can You Put Solar Panels On A Metal Roof?
Yes. While there are several metal roof types, the most common are standing seam and corrugated, both of which you can put solar on. Standing seam roofs are particularly adaptable for solar due to a special device called an S-5 clamp. The S-5 is designed to clamp (think pinch) the standing seam portion of the roof and therefore requires no actual penetration of the roof.
Can You Put Solar Panels on an East-Facing and/or West-Facing Roof?
Yes, solar can be installed on an east- and west-facing roof, however, is not recommended as the first option. East-facing panels will generate more electricity in the morning because the sun rises in the East, and less in the evening. Likewise, west-facing panels will generate more electricity in the evening. East-facing or west-facing solar can be beneficial if there is a high electricity demand in the morning or evening hours, however, south-facing and west-facing are preferred orientations for solar.
